Cisco UCS C200 Installation Guide download pdf (Page 27)

APPENDIX B

RAID Controller Considerations

This appendix includes the following sections:

• RAID Controller Options, page 19

• Enabling the ICH10R Onboard Controller, page 20

• Launching Option ROM-Based Controller Utilities, page 20

• Additional LSI Documentation Resources, page 21

RAID Controller Options

Cisco UCS C200 M1 Server and C210 M1 Server

These servers have the following options:

• There is an Intel ICH10R onboard SATA controller on the motherboard. This controller supports RAID

0 and 1 for up to four SATA drives. This controller must be enabled in the system BIOS before you can

use it, as described in Enabling the ICH10R Onboard Controller, on page 20.

• You can add an LSI 1064-based controller mezzanine card. This card provides RAID 0, 1, and 1E support

for up to four SAS or SATA drives.

Cisco UCS C250 M1 Server

You can add an LSI 3081-based controller card. This card provides RAID 0 and 1 support for up to eight SAS

or SATA drives.

All Other UCS C-Series Servers

You can add an LSI MegaRAID controller card. These cards provide RAID 0, 1, 5, 6, 10, 50, and 60 support

for up to twenty four SAS or SATA drives, depending on the LSI MegaRAID controller supported by your

UCS server.

Cisco UCS C-Series Servers VMware Installation Guide

OL-22182-02 19

1 2 ... 22 23 24 25 26 27 28 29 30

No comments

Cisco UCS C200 Installation Guide Page 27