Cisco Physical Access Gateway User Manual download pdf (Page 30)

Cisco ConfidentialPresentation_ID

Gateway module Web Configuration tool

 Eth0 IP Address assignment (connection to IP network)

 Static (manually assign Gateway module IP, default router, CPAM

server IP address, and TCP port number.)

 DHCP (Which is the module default)

 DHCP 0ption 150 should be the CPAM server IP address

 DHCP Option 151 should be the TCP port used

 Gateway will not fall back to any default IP address if DHCP is configured.

 Default gateway router, DNS server for the Gateway module and it’s IP

address are standard DHCP items provided by the DHCP server. You can use

a mix of DHCP for these, and static configuration for the CPAM IP and port.

• Eth1 pre-configured and not alterable

 Used only for a Mgmt interface

 IP address set to 192.168.1.42/24

1 ... 29 30 31 ... 114

No comments

Cisco Physical Access Gateway User Manual Page 30