Cisco 2600XM Series User Manual download pdf (Page 12)

Figure 7 Bracket Installation for Center Mounting with Rear Panel Forward: 19-, 23-, or 24-Inch Rack

Figure 8 Bracket Installation for Center Mounting with Front Panel Forward: 19-, 23-, or 24-Inch Rack

Installing Chassis in Rack

Install the chassis in the rack. Rack-mounting screws are not provided with the router. Use two screws for each side (supplied

with the rack).

Wall-Mounting the Chassis—1-Rack-Unit (RU) Chassis Height Only

Cisco 2600XM series and Cisco 2612 routers can be attached to walls.

Attaching Rubber Feet

If you are mounting a Cisco 2600XM series or Cisco 2612 router on a wall, you must install the rubber feet that are supplied

in the accessory kit. They provide a space for air circulation. Peel the rubber feet from the adhesive strip, and attach them onto

the five round recesses on the bottom of the chassis.

Attaching Brackets

Attach the standard brackets to the chassis as shown in Figure 9, using the slotted hex-head screws and plastic spacers (supplied

in the accessory kit). Orient each spacer so that the shoulder fits into the slot in the bracket.

62983

Note: The second bracket attaches

to the other side of the chassis.

Brackets for

19-inch rack

Brackets for

23-inch or 24-inch rack

110V 60 Hz

1.6A MAX

72016

Note: The second bracket attaches

to the other side of the chassis.

Brackets for

19-inch rack

Brackets for

23-inch or 24-inch rack

1 ... 11 12 13 ... 28

No comments

Cisco 2600XM Series User Manual Page 12