Cisco WS-C2960-48TC-L Datasheet Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 10 of 16
Description Specification
Connectors and Cabling
10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling
1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber).
Power Connectors
Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 675.
The connectors are located at the back of the switch.
Internal-Power-Supply Connector
The internal power supply is an autoranging unit.
The internal power supply supports input voltages between 100 and 240VAC.
Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Cisco RPS Connector
The connector offers connection for an optional Cisco RPS 675 that uses AC input and supplies DC output to the
switch.
The connector offers a 675W redundant power system that supports up to six external network devices and
provides power to one failed device at a time.
The connector automatically senses when the internal power supply of a connected device fails and provides
power to the failed device, preventing loss of network traffic.
Only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) should be attached to the redundant-power-supply
receptacle.
Indicators
Per-port status: Link integrity, disabled, activity, speed, full-duplex
System status: System, RPS, link status, link duplex, link speed
Dimensions (H x W x D)
Cisco Catalyst 2960-24TT: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
Cisco Catalyst 2960-48TT: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
Cisco Catalyst 2960-24TC: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
Cisco Catalyst 2960-48TC: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
Cisco Catalyst 2960G-24TC: 1.73 x 17.5 x 12.9 in. (4.4 x 44.5 x 32.8 cm)
Weight
Cisco Catalyst 2960-24TT: 8.0 lb (3.6 kg)
Cisco Catalyst 2960-48TT: 8.0 lb (3.6 kg)
Cisco Catalyst 2960-24TC: 8.0 lb (3.6 kg)
Cisco Catalyst 2960-48TC: 8.0 lb (3.6 kg)
Cisco Catalyst 2960G-24TC: 10.0 lb (4.5 kg)
Environmental Ranges
Operating temperature: 32 to 113ºF (0 to 45ºC)
Storage temperature: –13 to 158ºF (–25 to 70ºC)
Operating relative humidity: 10 to 85% (noncondensing)
Operating altitude: Up to 10,000 ft (3049 m)
Storage altitude: Up to 15,000 ft (4573 m)
Page view 9
1 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments