Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 19 of 26
Power
All Cisco Catalyst 6500 chassis hold up to two load-sharing, fault-tolerant, hot-swappable AC or
DC power supplies. Only one supply is required to operate a fully loaded chassis. If a second
supply is installed, it operates in a load-sharing capacity. The power supplies are hot-swappable—
a failed power supply can be removed without powering off the system.
Cisco Catalyst 6500 Series switch power supplies are available in the following power ratings
(Table 5):
●
950W AC input (Cisco Catalyst 6503 and Catalyst 6503-E chassis)
●
1400W AC input (Cisco Catalyst 6503 and Catalyst 6503-E chassis)
●
1000W AC input
●
1300W AC and DC input
●
2500W AC and DC input
●
3000W AC input
●
4000W AC input
●
6000W AC input
Tables 5 through 8 provide information about power supplies, fan trays, and chassis dimensions
and weights for the Cisco Catalyst 6500 Series.
Table 5. Power Supplies Available for Cisco Catalyst 6500 Series Switches
Power Supply AC Input Voltage/Current DC Input Voltage/Current
950W
●
100 to 240 VAC (±10% for full range)
●
15A
●
Note: Cisco Catalyst 6503 and 6503-E ONLY
●
–48 to –60 VDC continuous
●
38A at –48 VDC
●
30A at –60 VDC
1400W
●
100 to 240 VAC (±10% for full range)
●
20A
Note: Cisco Catalyst 6503 and Catalyst 6503-E only
Not supported
1000W
●
100 to 240 VAC (±10% for full range)
●
12A at 100 VAC
●
6A at 240 VAC
Note: Not supported with Supervisor Engine 720 or Cisco
Catalyst 6513
Not supported
1300W
(End of Sale
June 1, 2006)
●
100 to 240 VAC (±10% for full range)
●
17.25A at 100 VAC
●
8A at 200 VAC
Note: Not supported with Supervisor Engine 720 or Cisco
Catalyst 6513
●
–48 to –60 VDC continuous
●
38 A at –48 VDC
●
30 A at –60 VDC
2500W
●
100 to 120 VAC, 200 to 240 VAC (±10 percent for full range)
●
16A maximum at 200 VAC at 2500W output
●
16A maximum at 100 VAC at 1300W output
●
–48 to –60 VDC continuous
●
80A at –40.5 VDC
●
70A at –48 VDC
●
55A at –60 VDC
3000W
●
100 to 120 VAC, 200 to 240 VAC (±10% for full range)
●
16A maximum at 200 VAC at 3000W output
●
16A maximum at 100 VAC at 1450W output
Not supported
4000W
●
200 to 240 VAC (±10% for full range)
●
23A
●
–48 to –60 VDC continuous
●
80A at –40.5 VDC
●
70A at –48 VDC
●
55A at –60 VDC
Comments to this Manuals