Cisco WS-C3650-24TS-S Datasheet download pdf (Page 3)

Table 2. Network Module Configurations

Interface Options

Network Module 10 Gigabit Ethernet SFP+ Ports Gigabit Ethernet SFP Ports

4 x Gigabit Ethernet 0 4

2 0

0 4

4 x Gigabit Ethernet/2 x10 Gigabit Ethernet

Network Modules

1 2

4 0

0 4

2 2

3 1

4 x Gigabit Ethernet/4 x10 Gigabit Ethernet

Network Modules

1 3

Dual Redundant Modular Power Supplies

The Cisco Catalyst 3650 Series Switches support dual redundant power supplies (See Figure 2). The switch ships

with one power supply by default, and the second power supply can be purchased at the time of ordering the

switch or at a later time. If only one power supply is installed, it should always be in power supply bay 1. The

switch also ships with three field-replaceable fans.

Figure 2. Redundant Power Supplies

Table 3 shows the different power supplies available in these switches and available PoE power.

Table 3. Switch Models and Corresponding Default Power Supplies

Models Default Power Supply Available PoE Power

24-port data switch

48-port data switch

PWR-C2-250WAC -

24-port PoE switch

48-port PoE switch

PWR-C2-640WAC 390 W

48-port full PoE switch PWR-C2-1025WAC 775 W

In addition to the power supplies listed in Table 3, a 640 WDC power supply is available at the time of order or as

a spare on all switch models. The DC power supply also delivers PoE capabilities for maximum flexibility (refer to

Table 5 for available PoE budget with DC power supplies). Customers can mix and match the AC and DC power

supplies in the two available power supply slots. Any of these power supplies can be installed in any of the

switches.

The 250 WAC power supply will be supported on the PoE-capable switches in a future release.

1 2 3 4 ... 27

No comments

Cisco WS-C3650-24TS-S Datasheet Page 3