Cisco N2XX-AQPCI03 Datasheet download pdf (Page 22)

Cisco UCS C210 M2 General-Purpose Rack-Mount Server

CONFIGURING the SERVER

Approved Configurations

(1) Integrated SATA RAID 0/1 controller

■ Select up to 4 SATA (only) drives listed in Table 8. You cannot mix HDD and SDD SATA drive

types.

(2) LSI 1064E 4-port SAS 6.0G RAID Mezzanine card RAID controller

■ Select up to four SAS or SATA drives listed in Table 8. You cannot mix HDD and SSD drives.

You cannot mix SAS and SATA drive types.

(3) LSI MegaRAID SAS 9280-4i4e RAID controller

■ Select up to four SAS or SATA internal drives listed in Table 8 for configurations with the

factory-default extender. You cannot mix HDD and SSD drive types or SAS and SATA drives.

(4) LSI MegaRAID SAS 9261-8i RAID controller

■ Select up to eight internal SAS or SATA drives listed in Table 8. You can mix SAS and SATA

drives but you cannot mix HDD and SSD drive types. If you order the optional SAS Expander,

the controller can support up to 16 internal drives.

Caveats

■ If the integrated RAID controller on the server motherboard is used (no PCIe or mezzanine

card controller selected), all the drives must be SATA.

A SAS Extender is not field-upgradable to a SAS Expander, so if you are configuring a system with

eight or more drives or anticipate the system will implement more than eight drives in the

future, make sure you order a SAS Expander. You can replace an extender or expander only with

the same type of card.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 61 62

No comments

Cisco N2XX-AQPCI03 Datasheet Page 22