Cisco NM-1A-OC3MM-EP= Datasheet Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Connecting Cisco ATM Network Modules to the Network
ATM OC-3 Network Modules
5
Connecting Cisco ATM Network Modules to the Network
ATM T3/E3 Network Module LEDs
Table 3 shows the LEDs for the combined ATM T3/E3 network module.
ATM OC-3 Network Modules
ATM OC-3 network modules provide full 155-Mbps ATM connectivity, including STS-3c and STM-1
framing, for high-bandwidth data applications and voice-data integration applications. Characteristics
and installation of these modules are described in the following sections.
OC-3 Network Modules for Cisco 3600 and Cisco 3700 Series Routers, page 5
ATM-OC3-POM Network Module for Cisco 3800 Series Routers, page 10
Laser Safety Guidelines, page 13
Fiber-Optic Transmission Specifications, page 14
OC-3 Network Modules for Cisco 3600 and Cisco 3700 Series Routers
This section describes the following OC-3 (Optical Carrier level 3) network modules for most
Cisco 3600 and Cisco 3700 series routers.
Note ATM OC-3 network modules are not supported by the Cisco 3631 router.
The following modules are supported on the Cisco 3600 series routers and the Cisco 3725 router:
NM-1A-OC3MM provides a multimode (MM) fiber uplink port. See Figure 7.
NM-1A-OC3SMI provides a single-mode intermediate-reach (SMI) fiber uplink port. See Figure 8.
NM-1A-OC3SML provides a single-mode long-reach (SML) fiber uplink port. See Figure 9.
The following modules are supported on the Cisco 3745 router:
NM-1A-OC3MM-EP provides an MM fiber uplink port with enhanced performance. See Figure 7
for a similar faceplate.
NM-1A-OC3SMI-EP provides an SMI fiber uplink port with enhanced performance. See Figure 8
for a similar faceplate.
NM-1A-OC3SML-EP provides an SML fiber uplink port with enhanced performance. See Figure 9
for a similar faceplate.
The following modules are supported on the Cisco 3600 series routers:
Table 3 ATM T3/E3 Network Module LEDs
LED Color Meaning
TXCL Green Cell transmitted.
RXCL Green Cell received.
RXALM Yellow Alarm indication signal.
RXCR Green Carrier present.
Loopback LED Green Loopback
Page view 4
1 2 3 4 5 6 ... 18

Comments to this Manuals

No comments