Cisco SRP527W User's Guide download pdf (Page 5)

Step 3: After you have installed the filter/splitter, we recommend that

you test the telephone to make sure it works the same way as it did

before the installation. This is done by checking if you have a dial tone

and that there is no interference on your telephone line. If you don’t

have a dial tone or there is interference on the line, please review and

repeat the steps above. If your router will be sharing the same socket

as the telephone, you can plug it into the socket on the filter/splitter

marked ‘ADSL Modem’ when the Install CD asks you to. Otherwise,

just leave this socket empty.

b) For a wall-mounted telephone and socket

You will need a special filter/splitter if any wall-mounted telephones

share the same phone number as your ADSL service. If you didn’t order

one when you signed up, you can buy a wall phone filter/splitter from

a Telstra store or selected Partners.

Step 1: Apply firm upwards pressure on the telephone until it is released

from the mounting screws on the wall plate. Then remove the short

cable from the wall plate, leaving it attached to the telephone.

Step 2: Plug the short cable (labelled ‘Line’) on the back of the filter/

splitter into the socket on the wall plate.

Next, align the mounting screws on the filter/splitter with the mounting

screws on the wall plate. Then slide the filter/splitter downward until it

stops sliding and is secured firmly.

Step 3: Plug the short cable on the telephone into the socket on the

front of the filter/splitter that is labelled ‘Local Phone’.

Next, align the mounting holes on the telephone with the mounting

screws on the filter/splitter. Then slide the telephone downward until it

stops sliding and is secured firmly.

Finally, to connect the router to the filter/splitter, plug it into the socket

labelled ‘ADSL Router’.

The wall phone filter/splitter also includes an additional socket for other

telephone devices.

0807

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Cisco SRP527W User's Guide Page 5