Cisco WMP54GR User's Guide download pdf (Page 25)

Chapter 4: Using the Wireless Network Monitor

Site Survey

Wireless-G PCI Adapter with RangeBooster

the passphrase of your other wireless network devices and is compatible with Linksys wireless products

only. (If you have any non-Linksys wireless products, enter the WEP key manually on those products.)

WEP Key - The WEP key you enter must match the WEP key of your wireless network. For 64-bit

encryption, enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26

hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Then click Connect.

• If your network has the wireless security WPA Personal (Wi-Fi Protected Access) enabled, this screen will

appear.

Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down

menu.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase

field.

Then click Connect.

• If your network has the wireless security PSK2 (Pre-shared key 2) enabled, this screen will appear.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase

field.

Then click Connect.

Figure 4-7: WPA-Personal Needed for Connection

Figure 4-8: PSK2 Needed for Connection

1 ... 24 25 26 ... 59

No comments

Cisco WMP54GR User's Guide Page 25