Cisco SPA 504G Technical Information download pdf (Page 172)

Provisioning

Updating Profiles and Firmware

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 170

Launch a Firmware Update by using a Browser Command

An upgrade command entered into the browser address bar can be used to

upgrade firmware on a phone. The phone updates only when it is idle. The update

is attempted automatically after the call is complete.

To update the phone firmware, enter this command:

http://phone-ip-address/admin/upgrade?protocol://server-

name[:port]]/firmware-path

• protocol defaults to TFTP.

• server-name defaults to the host requesting the URL.

• port defaults to:

- 69 for TFTP

- 80 for HTTP

- 443 for HTTPS

• firmware-path defaults to /spa.bin (The firmware-pathname typically

includes the file name of the binary located in a directory on the TFTP or

HTTP server. For example, http://192.168.2.217/admin/

upgrade?tftp://192.168.2.251/spa.bin) for SPA phones, and

/wip310.img for the Cisco WIP310.)

Launch a Profile Update by using a Browser Command

Cisco SPA IP phones can synchronize to specific profiles stored on a remote

server. The phone resyncs only when it is idle. The update is attempted

automatically after the call is complete.

To update the phone profile, enter this command:

http://phone-ip-addr/admin/resync?protocol://server-

name[:port]/profile-pathname

• phone-ip-addr is the IP address of the phone.

• Parameter following resync? defaults to the Profile Rule setting on the

web server Provisioning page.

• protocol defaults to TFTP.

• server-name defaults to the host requesting the URL.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 331 332

No comments

Cisco SPA 504G Technical Information Page 172