Cisco 4400G User's Guide download pdf (Page 11)

• If you will connect your DMP to an analog display,

do all of the following:

–

Plug one yellow jack on the RCA video cable

into the CVBS interface on your DMP.

–

Plug the 3mm jack on the RCA audio cable

into the AUDIO interface on your DMP.

Step 2 Connect the other end of the cable (or cables) to the

corresponding interface (or interfaces) on your

DMP display.

Step 3 If the DMP display is not already turned on, turn it

on now.

5 Connecting to a 100V–240V

AC Socket

Warning

Use only the supplied power cable and adapter.

Step 1 Connect the DMP power cable to the AC adapter.

Step 2 Connect the DC barrel connector to the 12V DC power

supply on the DMP chassis.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Cisco 4400G User's Guide Page 11