Cisco 4400G User's Guide download pdf (Page 8)

Step 1 Plug one end of an ordinary Ethernet cable into the

Ethernet 10/100 port on the back of the DMP chassis.

Step 2 Plug the other end of the Ethernet cable into a network

hub, network switch, or router that participates in a

DHCP network.

4 Connecting to a DMP Display

We recommend that you use a digital display, not analog. For

the type of digital display, we recommend LCD, not plasma.

Digital signage uses static images more often than it uses

full-motion video. Most often, content is web-based or

animated in Flash. The nature of these media types means that

some pixels are not updated frequently in digital signage. Given

that LCDs are less susceptible to burn-in than plasma displays

are, LCD displays are the superior choice for digital signage.

Even though image persistence is sometimes a problem on LCD

displays, it is almost always self-correcting and is unlikely to

occur if you follow manufacturer guidelines for managing your

displays correctly.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Cisco 4400G User's Guide Page 8