Cisco PTZ Technical Information download pdf (Page 20)

Installing The Camera

Installing the Software

Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE 20

Proceed to the next section to continue camera configuration.

Configuring the Camera’s Network Settings

Follow these steps to configure the camera’s network settings.

STEP1 To continue configuring the camera’s network settings, click Next. The Network

Settings screen appears.

STEP 2 Select one of the following options to assign an IP address to the camera:

• Static IP address—Select this option to assign the camera a static IP

address.

• Automatic Configuration DHCP—Select this option to assign the camera

an automatic IP address from a DHCP server on your network.

• PPPoE—Select this option if using a PPPoE connection to access the

Internet to assign the camera an automatic IP address.

STEP 3 Click Next to continue. The IP Setting screen appears.

STEP4 Make any changes appropriate for your camera to integrate into your network,

then click Next to continue.

STEP 5 Confirm the changes you are about to make by clicking OK on the confirmation

screen. The wizard will show an hourglass while it configures your camera.

The New Internet Camera Settings screen appears and displays the camera’s

settings.

STEP 6 Click Next to continue. A dialog box appears prompting you whether to change the

settings.

STEP 7 Click OK to continue. A dialog box appears informing you that your configuration

has been saved successfully.

STEP 8 Click OK to continue. The

Congratulations

screen appears.

STEP 9 Click Exit to automatically launch your default web browser and proceed to the

Home page of the camera.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 68 69

No comments

Cisco PTZ Technical Information Page 20