Getting to Know the PVC300 PTZ Internet Camera
Overview
Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE 9
1
Figure 3 Internal Microphone
General I/O Terminal Block
The General I/O Terminal Block allows you to connect the camera to external
input/output devices.
The ports are numbered from 1 to 4. If you place the camera on a table and look at
the back side, port 1 is left-most port and port 4 is the right-most port.
The following table describes the ports:
Port # Description
1 Power
12VDC +- 5% 1.5A max, Max rating 2.0A
2 Digital output
Max. 40 VDC, Max. 400mA, isolation 2kV
3 Digital input
Open/short-to-ground, isolation 2kV, internal pull-up
4 Ground
Comments to this Manuals