Cisco PTZ Technical Information download pdf (Page 38)

Using the Setup Screen

Netfilter

Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE 38

Netfilter

The Netfilter controls the access permission of clients by checking the client IP

Address. Click on the check box Enable IP address filtering to enable Netfilter.

There are two options for permission control in the drop down menu: Allow and

Deny.

Only those clients whose IP address is in the Allowed List and not in the Denied

List can connect to the Video Server or PVC300 PTZ Internet Camera for receiving

the audio/video streaming. Both Allowed List and Denied List consist of a single IP

Address, list of IP Address ranges, or a network mask.

If you want to add a new IP address, click on the Add button and type the IP

Address you want to Allow or Deny. There are 3 methods of filtering in the drop

down menu: Single IP address, IP Address Range and Network.

If you want to add a new IP Address range, click on the Add button and type the

Begin IP Address on the left text box and End IP Address in the right text box. If

you want to add a new Network, click on the Add button and type the Network you

want to Allow or Deny.

If you want to remove an existing IP Address, IP address range, or Network, just

select from the pull-down menu and click on the Delete button. Both the Allowed

List and Denied List can have 10 entries.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 68 69

No comments

Cisco PTZ Technical Information Page 38