Cisco XR 12000 Series User Manual Page 129

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 128
CHAPTER
5-1
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
5
Installing and Removing a Shared Port Adapter
Revised: December 2012, OL-17438-04
This chapter describes how to install or remove SPAs on the Cisco XR 12000 Series Router. This chapter
contains the following sections:
Handling SPAs, page 5-1
Online Insertion and Removal, page 5-2
SPA Installation and Removal, page 5-2
Optical Device Installation and Removal, page 5-3
Checking the Installation, page 5-4
Handling SPAs
Each SPA circuit board is mounted to a metal carrier and is sensitive to electrostatic discharge (ESD)
damage. Before you begin installation, read
“Preparing to Install a Shared Port Adapter or a SPA
Interface Processor” for a list of parts and tools required for installation.
Caution Always handle the SPA by the carrier edges and handle; never touch the SPA components or connector
pins. (See Figure 5-1.)
When a slot is not in use, a blank must fill the empty slot to allow the router or switch to conform to
electromagnetic interference (EMI) emissions requirements and to allow proper airflow across the
installed modules. If you plan to install a SPA in a slot that is not in use, you must first remove the blank.
Figure 5-1 Handling a SPA
H6420
Metal carrier
Printed circuit board
Page view 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 147 148

Comments to this Manuals

No comments