Cisco ME 3400 Installation Guide download pdf (Page 16)

Install the SFP Modules and Connect to the Ports

Note If you install the SFP module into slot 1, the label on that module faces up. If you install the

SFP module into slot 2, the label on that module faces down.

Follow these steps:

For a list of supported modules, see the release notes on Cisco.com. For detailed instructions on

installing, removing, and connecting to SFP modules, see the documentation that came with the

SFP module.

Caution Removing and installing an SFP module can shorten its useful life. Do not remove and

insert SFP modules more often than is absolutely necessary.

For instructions on using the SFP patch cable, see the “Switch Installation” chapter of the hardware

installation guide.

Step 1

Grasp the module on the sides, and

insert it into the switch slot until you

feel the connector snap into place.

Step 2

Insert an appropriate cable into the

module port. Insert the other cable

end into the other device.

Cisco ME 3400

SERIES

SFP module

Cisco ME 3400

SERIES

SFP module port

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

Cisco ME 3400 Installation Guide Page 16