Cisco ME 3400 Installation Guide download pdf (Page 9)

The Cisco IE2100 Series Configuration Registrar is a network management device that works with

embedded CNS agents in the switch software. You can use IE2100 to automate initial configurations

and configuration updates on the switch.

See the “Accessing Help Online” section on page 18 for a list of supporting documentation.

5 Rack-Mounting and Switch Port Connections

This section covers basic 19-inch rack-mounting and switch port connections. For alternate mounting

procedures, such as installing the switch in a 23-inch, 24-inch, or a

European Telecommunication

Standards Institute (ETSI) rack, installing a switch on a wall, and for additional cabling information,

see the Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide or the Cisco ME 2400

Ethernet Access Switch Hardware Installation Guide on Cisco.com.

Equipment That You Supply

You need to supply a number-2 Phillips screwdriver to rack-mount the switch. Alternative mounting

hardware such as ETSI brackets or other hardware that does not ship with the switch must be supplied

separately.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

Cisco ME 3400 Installation Guide Page 9