Cisco N2XX-AQPCI03 Datasheet download pdf (Page 17)

Cisco UCS C210 M2 General-Purpose Rack-Mount Server

CONFIGURING the SERVER

STEP 4 CHOOSE RAID CONFIGURATION

The base server motherboard comes with an integrated SATA RAID 0/1 controller, which supports

up to 4 SATA drives only (the integrated controller does not support SAS drives). Therefore, a

separate plug-in PCIe controller card is not required when ordering SATA drives and a RAID 0 or 1

configuration is desired.

You can use the built-in SATA RAID 0/1 controller as described in the preceding paragraph or you

can instead choose to implement a RAID configuration by using the optional mezzanine card on

the server motherboard or by using an optional plug-in PCIe RAID controller card.

Cisco can provide factory-configured RAID 0, 1, 1E, 5, 6, and 10 systems depending on the RAID

implementation chosen and the number of drives ordered. Factory-configured RAID options are

listed at the end of

Table 6. Note that RAID levels 50 and 60 are supported on the 9280-4i4e and

9261-8i, but are not factory configurable.

Choose RAID Options

Choose one RAID controller, one RAID configuration option, and, if desired, the battery backup

option listed in

Table 6.

Table 6 Available RAID Options

Product ID (PID) PID Description

RAID Controllers

R2X0-ML002 LSI 1064E 4-port SAS 3.0G RAID Mezzanine Card

■ Installed on the mezzanine connector inside the UCS C210 M2 server

■ Supports up to four SAS or SATA drives with the factory default SAS Extender

or the optional SAS Expander installed. You cannot mix SSD and HDD drive

types. You cannot mix SAS and SATA drives.

■ No battery backup

■ Factory-configured RAID options: RAID 0, 1, or 1E

UCSC-RAID-C-4I4E LSI MegaRAID SAS 9280-4i4e, four internal and four external ports

■ Takes up one of five available PCIe slots (must be installed in slot #4)

■ Supports up to 4 internal SAS or SATA drives (no mixing) plus external JBOD

expansion with the factory default SAS Extender installed. You cannot mix

SSD and HDD drive types

■ Battery backup option available (see the battery backup PID section in this

table)

■ Factory-configured RAID options: RAID 0, 1, 5, 6, 10 (see the RAID PIDs

section in this table)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

No comments

Cisco N2XX-AQPCI03 Datasheet Page 17