Cisco N2XX-AQPCI03 Datasheet download pdf (Page 18)

Cisco UCS C210 M2 General-Purpose Rack-Mount Server

CONFIGURING the SERVER

R2XX-PL003 LSI MegaRAID SAS 9261-8i (RAID 0, 1, 5, 6, 10)

■ Takes up one of five available PCIe slots (must be installed in slot #4)

■ Supports up to eight internal SAS or SATA drives with the factory default SAS

Extender installed. You can mix SAS and SATA drive types, but you cannot mix

HDD and SSD drive types.

■ Supports up to 16 internal SAS or SATA drives with the optional SAS Expander

installed. You can mix SAS and SATA drive types, but you cannot mix HDD and

SSD drive types.

■ Includes 512 MB of write cache

■ Battery backup option available (see the battery backup PID section in this

table)

■ Factory-configured RAID options: RAID 0, 1, 5, 6, 10 (see the RAID PIDs

section in this table)

RAID Battery Backup Option (not available with mezzanine card)

R2XX-LBBU2 Battery Backup

RAID Configuration (note: Mezzanine card supports only RAID 0, 1, and 1E)

R2XX-RAID0 Factory pre-configured RAID striping option

Enable RAID 0 Setting. Requires a minimum of 1 hard drive.

R2XX-RAID1 Factory pre-configured RAID mirroring option

Enable RAID 1 Setting. Requires exactly 2 drives, with same size, speed, capacity.

R2XX-RAID5 Factory pre-configured RAID option

Enable RAID 5 Setting. Requires minimum 3 drives of same size, speed, capacity.

R2XX-RAID6 Factory pre-configured RAID option

Enable RAID 6 Setting. Requires minimum 4 drives of same size, speed, capacity.

R2XX-RAID10 Factory pre-configured RAID option

Enable RAID 10 Setting. Requires an even number of drives (minimum 4 drives) of

same size, speed, capacity.

NOTE: No RAID option can be chosen if you have one of the following configurations:

• A mix of SAS and SATA drives

•No drives

Table 6 Available RAID Options (continued)

Product ID (PID) PID Description

CAUTION: If one of your RAID cards is equipped with a

battery backup unit (BBU), be aware that hot swapping the

BBU is not supported. Please perform a graceful shutdown

of the server prior to replacing the BBU.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 61 62

No comments

Cisco N2XX-AQPCI03 Datasheet Page 18