A-7
Cisco 1710 Security Router Software Configuration Guide
78-12696-01
Appendix A ROM Monitor
Disaster Recovery with TFTP Download
Optional Variables
The folowing variables can be set with the commands shown before using the
tftpdnld command:
Variable Command
Configures how the router displays
file download progress.
0—No progress is displayed.
1—Exclamation points (!!!) are
displayed to indicate file download
progress. This is the default setting.
2—Detailed progress is displayed
during the file download process. For
example:
Initializing interface.
Interface link state up.
ARPing for 1.4.0.1
ARP reply for 1.4.0.1 received.
MAC address 00:00:0c:07:ac:01
TFTP_VERBOSE= setting
Number of times the router attempts
ARP and TFTP download. The default
is 7.
TFTP_RETRY_COUNT= retry_times
Amount of time, in seconds, before the
download process times out. The
default is 2, 400 seconds (40 minutes).
TFTP_TIMEOUT= time
Whether or not the router performs a
checksum test on the downloaded
image:
1—Checksum test is performed.
0—No checksum test is performed.
TFTP_CHECKSUM=setting
Comments to this Manuals