Cisco 3660 User Manual download pdf (Page 9)

Configuring the NAM Management Network Parameters

When you configure the internal NAM interface as the management interface, the IP address must be

in the same subnet as the IP address of the Analysis-Module interface configured on the router CLI.

Step 1 Specify the internal NAM interface for handling management traffic.

root@localhost# ip interface internal

Step 2 Configure the NAM system IP address and subnet mask.

root@localhost# ip address

ip-address subnet-mask

Step 3 Configure the NAM system broadcast address.

root@localhost# ip broadcast

broadcast-address

Note This step is optional.

Step 4 Configure the NAM system default gateway address.

root@localhost# ip gateway

ip-address

Step 5 Set the NAM system domain name.

root@localhost# ip domain

name

Step 6 Set the NAM system host name.

root@localhost# ip host

name

Step 7 Set one or more NAM system name servers.

root@localhost# ip nameserver

ip-address

Note This step is optional but highly recommended. Unexpected delays can occur if a

name server is not set.

Step 8 Optionally check the connectivity to the device by pinging an external host or address.

root@localhost# ping

host

root@localhost# ping

ip-address

Step 9 Verify that the device is properly configured.

root@localhost# show ip

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

No comments

Cisco 3660 User Manual Page 9