Cisco 521 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Post-Installation Checklist
After you install the Cisco Smart Business Communications System, perform the following activities as needed.
Use the Cisco Configuration Assistant to change the default settings.
In
Congure > Device Properties > Users and Passwords, change the default username and password for all
the devices.
In
Congure > Device Properties > Hostname, change the default hostname for each device.
In
Congure > Device Properties > System Time, set the system time zone, time display, and the NTP servers
for the UC500.
T
o access the voice system conguration tabs for the UC500, launch Congure > Telephony > Voice.
In the
Device Parameters tab, designate the system message. This message appears on the Cisco Unied IP
Phone screens. For example, change the system message to the customer business name.
In the
Dial Plan/Voice Mail tab, set the number of digits for each Cisco phone extension.
In the
Voice System Features tab, congure Cisco phone features and intercom.
Congure extensions in the
User Parameters tab, or build a comma-separated value (.csv) le with names and
extension numbers to import into the Cisco Conguraton Assistant.
I
n the Network Parameters tab, congure network settings for voice.
Note: You perform the above tasks from PC-1, the PC that is running the Cisco Conguration Assistant.
For more information about the Cisco Conguration Assistant, see the online help.
Perform remote monitoring activities.
Inform your customer that the Cisco Monitor Manager has been installed at the customer’s main site. Then show the
customer how to use the Cisco Monitor Manager.
Decide whether you want to use the Cisco Monitor Director to generate
subscription-based reports for your
customers. If yes, generate a Network Summary Report, Performance Summary Report, and Monthly Summary
Report to demonstrate the value of these subscription-based reports.
Enable your customers to make future configuration changes.
If you want your customer to be able to use the Cisco Conguration Assistant to make future conguration changes
themselves (for example, by adding another Cisco Unied IP Phone), then inform your customers that you have installed
the Cisco Conguration Assistant on PC-1 and that they can use the Cisco Conguration Assistant for future conguration
changes.
Page 10
Page view 9
1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments