Page 8Page 8
5
Deploy Controller-Based Wireless
C. Deploy Cisco Mobility Express Solution in
Controller Mode
When the advanced features and controller-mode
access points are needed, deploy the controller-based
architecture. In the controller-based architecture, you can
deploy up to two controllers and 12 access points
(six Cisco 521 Wireless Express Access Points per
controller). If desired, you can deploy the two controllers
in redundant mode.
1
Verify that a DHCP server is operating on the network.
You can use the DHCP server features of the UC500.
Power up the Cisco 526 Wireless Express Mobility
controller (WLC526).
Connect PC-1 to the controller management port
(port 1) of the WLC526.
From PC-1, start Internet Explorer and browse to
http://192.168.1.1. The Startup Wizard launches. Follow
the prompts to congure the WLC526. When you save
your settings, the WLC526 restarts.
5
Start Internet Explorer again, enter the new IP address
of the management port, obtained in Step 4, for the
WLC526, and verify that the WLC526 is accessible.
6
Power off the WLC526, and disconnect PC-1 from the
WLC526. Reconnect PC-1 to a PoE port on the UC500,
and launch the Cisco Conguration Assistant.
7
Determine which of the available PoE ports on the
CE520 is to be used to connect the WLC526.
From the Cisco Conguration Assistant, change the
port role of the designated port to Access Point:
• In the Topology View window, choose the CE520.
• Choose
Congure > Smartports. In the Smartports
window, assign the designated port a port role of
Access Point.
8
Connect the WLC526 to the designated port that you
just assigned a port role of Access Point.
9
In the Topology View window, right-click the WLC526
icon, and choose Add to community to add the
WLC526 to the community. Use the default system
administration username and password for the WLC526.
10
From the Cisco Conguration Assistant, choose Congure
> Wireless > Secure Wireless, and congure the
options in the Secure Wireless window for the WLC526.
11
On the CE520, install up to six access points:
• Determine which of the available PoE ports on the
CE520 is to be used to connect a Cisco 521 Wireless
Express Access Point. From the Cisco Conguration
Assistant, change the port role of the designated port
to Access Point:
• In the Topology View window, choose the CE520.
• Choose
Congure > Smartports. In the Smartports
window, assign the designated port a port role of
Access Point.
• Connect the Cisco 521 Wireless Express Access
Point to the designated port that you just assigned a
port role of Access Point.
The WLC526 congures the access points automatically.
12
9HA$8VWaZ
BdYZb
IZaZldg`Zg
H^iZ
;Vm
8ViVanhi:megZhh*'%Hl^iX]
8^hXdJc^[^ZY
8dbbjc^XVi^dch
*%%HZg^ZhEaVi[dgb
8^hXd*'+L^gZaZhh:megZhh
BdW^a^in8dcidaaZg
8^hXd
8dc[^\jgVi^dc
6hh^hiVci
8^hXd
-,%HZg^Zh
GdjiZg
EHIC
>ciZgcZi
8^hXd*'&
L^gZaZhh:megZhh
6XXZhhEd^cih
E8"&
8
230631
(32 pages)
(66 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals