Cisco XR 12000 Specifications download pdf (Page 44)

4-2

Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2

Release 3.2, OL-6396-01, Rev.A1 January 9, 2006

Chapter 4 Configuring Ethernet SPAs on Cisco IOS XR Software

Configuration Tasks

SUMMARY STEPS

1. show version

2. show interface

3. configure

4. interface type number

5. ipv4 address ip-address mask

ipv6 address ipv6-prefix/prefix-length

6. flow-control {bidirectional | egress | ingress}

7. negotiation auto

8. mac-accounting {egress | ingress}

9. mtu value

10. mac-address value1.value2.value3

11. no shutdown

12. end

commit

DETAILED STEPS

Command or Action Purpose

Step 1

show version

Example:

RP/0/0/CPU0:Router> show version

(Optional) Displays the current software version, and can

also be used to confirm that the router recognizes the line

card.

Step 2

show interfaces

Example:

RP/0/0/CPU0:Router> show interface

(Optional) Displays the configured interface and checks the

status of each interface port.

Step 3

configure

Example:

RP/0/0/CPU0:Router> configure terminal

Enters global configuration mode.

Step 4

interface type number

Example:

RP/0/0/CPU0:Router(config)# interface

gigabitethernet 0/2/0/1

Enters interface configuration mode, where:

• type—Specifies gigabitethernet for the Gigabit

Ethernet SPAs.

• number—Specifies the Ethernet interface in the

notation rack/slot/module/port.

The example indicates Gigabit Ethernet interface 1, on a

SPA in subslot 0, in line card slot 2.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 135 136

Comments to this Manuals

No comments

Cisco XR 12000 Specifications Page 44

Comments to this Manuals

Related products and manuals for Networking Cisco XR 12000