Cisco XR 12000 Specifications download pdf (Page 99)

CHAPTER

8-1

Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2

Release 3.2, OL-6396-01, Rev.A1 January 9, 2006

Command Summary for the Gigabit Ethernet SPA

Table 8-1 provides an alphabetical list of some of the related commands to configure, monitor, and

maintain Gigabit Ethernet SPAs. For more information about the commands, see Chapter 10, “Command

Reference” in this book and the Cisco IOS XR software command reference publications.

Table 8-1 Command Summary

Command Purpose

RP/0/0/CPU0:Router# configure

Enters global configuration mode.

RP/0/0/CPU0:Router(config)# interface

gigabitethernet rack/slot/subslot/port

Specifies the Gigabit Ethernet interface to configure.

RP/0/0/CPU0:Router(config-if)# ipv4 address

ip-address mask

RP/0/0/CPU0:Router(config-if)# ipv6 address

ipv6-prefix/prefix-length

Sets a primary or secondary IP address for an interface.

RP/0/0/CPU0:Router(config-if)# flow control

{bidirectional | egress | ingress}

Enables the sending of flow-control pause frames.

RP/0/0/CPU0:Router(config-if)# mac-accounting

{egress | ingress}

Generates accounting information for IP traffic based on the

source and destination MAC addresses on LAN interfaces.

RP/0/0/CPU0:Router(config-if)# mtu value

Sets the maximum transmission unit (MTU) value for the

interface.

RP/0/0/CPU0:Router(config-if)# negotiation auto

Enables advertisement of speed, duplex mode, and flow control

on a Gigabit Ethernet interface.

RP/0/0/CPU0:Router(config-if)# no shutdown

Enables an interface.

RP/0/0/CPU0:Router(config-if)# commit

Saves the configuration changes to the running configuration file

and remains within the configuration session.

RP/0/0/CPU0:Router(config-if)# end

Prompts you to save the configuration changes and exits the

configuration session.

RP/0/0/CPU0:Router# show interfaces

Displays the configured interface and checks the status of each

interface port.

RP/0/0/CPU0:Router# show version

Displays the current software version, and can also be used to

confirm that the router recognizes the line card.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 135 136

Comments to this Manuals

No comments

Cisco XR 12000 Specifications Page 99

Comments to this Manuals

Related products and manuals for Networking Cisco XR 12000