Cisco XR 12000 Specifications download pdf (Page 94)

7-6

Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2

Release 3.2, OL-6396-01, Rev.A1 January 9, 2006

Chapter 7 Upgrading Field-Programmable Devices

Troubleshooting Problems with SPA FPD Image Upgrades

Caution Upgrading the FPD image on a SPA places the SPA offline and interrupts traffic. An image upgrade can

require 30 seconds or longer to complete depending on the SPA.

SPA FPD Image Upgrade Example

The following example displays the output from the upgrade hw-module fpd command:

RP/0/0/CPU0:ios(admin)# upgrade hw-module fpd fpga force location 0/3/1

SP/0/3/SP:Feb 25 17:13:21.349 : upgrade_daemon[124]: Start Upgrade...

SP/0/3/SP:Feb 25 17:13:21.356 : upgrade_daemon[124]: programming...with file

/net/node0_RP1_CPU0/hfr-lc-3.2.80/fpd/ucode/espam_damselfly_isp1.xsvf

SP/0/3/SP:Feb 25 17:13:22.925 : upgrade_daemon[124]: ...continue programming...

SP/0/3/SP:Feb 25 17:13:22.931 : upgrade_daemon[124]: ...it will take a while...

SP/0/3/SP:Feb 25 17:13:23.029 : upgrade_daemon[124]: ...it does take a while...

SP/0/3/SP:Feb 25 17:13:48.286 : upgrade_daemon[124]: ...continue programming...

SP/0/3/SP:Feb 25 17:13:48.292 : upgrade_daemon[124]: ...it will take a while...

SP/0/3/SP:Feb 25 17:13:48.314 : upgrade_daemon[124]: almost...done

Successfully upgraded spa fpga instance 1 on location 0/3/1.

Troubleshooting Problems with SPA FPD Image Upgrades

This section contains information to help troubleshoot problems that can occur during the upgrade

process.

Power Failure or Removal of a SPA During an FPD Image Upgrade

If the FPD upgrade operation is interrupted by a power failure or the removal of the SPA, it could corrupt

the FPD image. This corruption of the FPD image file makes the SPA unusable by the router and the

system will display the following messages when it tries to power up the SPA. When it cannot

successfully power up the SPA, it places it in the FAILED state.

LC/0/3/CPU0:Feb 4 08:23:16.672 : spa_192_jacket[188]: %L2-SPA-5-OIR_INSERTED : SPA

discovered in bay 0

LC/0/3/CPU0:Feb 4 08:23:23.349 : spa_192_jacket[188]: %L2-SPA-5-OIR_ERROR : SPA (0): An

error occurred (0x1002), error recovery action: reset SPA

LC/0/3/CPU0:Feb 4 08:23:26.431 : spa_192_jacket[188]: %L2-SPA-5-OIR_INSERTED : SPA

discovered in bay 0

LC/0/3/CPU0:Feb 4 08:23:32.593 : spa_192_jacket[188]: %L2-SPA-5-OIR_ERROR : SPA (0): Too

many retries, error recovery stopped

LC/0/3/CPU0:Feb 4 08:23:32.593 : spa_192_jacket[188]: %L2-SPA-5-OIR_ERROR : SPA (0): An

error occurred (0x1002), error recovery action: hold SPA in reset

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 135 136

No comments

Cisco XR 12000 Specifications Page 94