Cisco 600W Installation Guide download pdf (Page 16)

Chapter 1 Overview

Supported Devices and Configurations

1-2

Cisco Redundant Power System Hardware Installation Guide

OL-3654-01

• LEDs for AC, DC, fans, and temperature status

• Simple Network Management Protocol (SNMP) support of error messages

for Cisco 2600 series and Cisco 3620/3640 series routers. (There is no SNMP

support for error messages in the Cisco 1516M hub, FastHub 400 series hub,

Catalyst 1900 series switches, Catalyst 2820 series switches, Catalyst 2900

and Catalyst 3500 series XL switches, Cisco 2500 and 4000 series routers,

and the Cisco MC3810 multiservice concentrator.)

The Cisco RPS ships in either of the following configurations:

• With cables (Cisco RPS number PWR600-AC-RPS-CAB)—Includes four

one-to-one (22-pin to 18-pin) cables for connecting to hubs and switches or

for quasi-redundant support for Cisco 2600 series routers; Cisco 3620, Cisco

3640, and Cisco 3725 routers; and Cisco 4000 series routers.

• Without cables (Cisco RPS number PWR600-AC-RPS-NCAB)—Cables

must be ordered separately:

–

One-to-one (22-pin to 18-pin) cables for connecting to hubs and switches

or for quasi-redundant support for Cisco 2600 series routers; Cisco 3620,

Cisco 3640, and Cisco 3725 routers; and Cisco 4000 series routers

–

One-to-one (22-pin to 8-pin) cables for quasi-redundant support for

Cisco 2500 series routers and access servers and Cisco MC3810

multiservice concentrators

–

Two-to-one Y cables (22-pin to 18-pin or 22-pin to 8-pin) for fully

redundant support only for routers or concentrators

Note Refer to Table 3-1 on page 3-5 for cable descriptions and order numbers.

Supported Devices and Configurations

Table 1-1 lists the supported external devices and power configurations. The

power configurations are described in the following subsections.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

No comments

Cisco 600W Installation Guide Page 16