Cisco PIX 506E - Security Appliance User Manual download pdf (Page 9)

Doc.Ref tgbvpn_ug_PIX-506E_en

Doc.version

100B –

May 2008

VPN version 4.x

IPSec VPN Router Configuration Property of TheGreenBow Sistech SA - © Sistech 2001-2008 9/15

3.2 VPN Client Phase 2 (IPSec) Configuration

You may define a static virtual IP

address here.

If you use 0.0.0.0, you will have

error “Local-ID” is missing. It

does not prevent you from

establishing a tunnel

Enter the IP address

(and subnet mask)

of the remote LAN.

Phase 2 Configuration

3.3 Open IPSec VPN tunnels

Once both Cisco PIX-506E firewall and TheGreenBow IPSec VPN Client have been configured accordingly, you

are ready to open VPN tunnels. First make sure you enable your firewall with IPSec traffic.

1. Click on "Save & Apply" to take into account all modifications we've made on your VPN Client configuration

2. Click on "Open Tunnel", or generate traffic that will automatically open a secure IPSec VPN Tunnel (e.g. ping,

IE browser)

3. Select "Connections" to see opened VPN Tunnels

4. Select "Console" if you want to access to the IPSec VPN logs and adjust filters to display less IPSec

messaging. The following example shows a successful connection between TheGreenBow IPSec VPN Client and

a Cisco PIX-506E Firewall.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No comments

Cisco PIX 506E - Security Appliance User Manual Page 9