Cisco UCS-CPU-E52609BC= Datasheet download pdf (Page 47)

Cisco UCS B200 M3 Blade Server

SUPPLEMENTAL MATERIAL

— QLogic M73KR-Q

■ Cisco Storage Accelerator adapters

— Cisco UCS 785 GB MLC Fusion-io ioDrive2

— LSI 400 GB SLC WarpDrive

The following sections explain the various I/O options that are possible with the different Fabric Extenders

(Cisco UCS 2208XP, 2204XP, and 2104XP) and the VIC 1240 and mezzanine adapters.

B200 M3 Configured with 1 CPU

In a B200 M3 configured with 1 CPU, the mezzanine card slot is not under the control of a CPU (in a B200 M3

configured with 2 CPUs, CPU 2 controls the slot). Therefore, the only adapter that can be placed in the

mezzanine slot in a B200 M3 configured with 1 CPU is the Cisco UCS Port Expander Card for VIC 1240, and

the VIC 1240 is always required to be installed in the VIC 1240 slot.

Connectivity using the Cisco UCS 2208XP Fabric Extender

The Cisco UCS 2208XP is the second-generation Fabric Extender, and shares the same form factor as the

current UCS 2100 series. The 2208XP is backwards compatible with the UCS 5108 Blade server chassis.

The options shown in Figure 10 and Figure 11 demonstrate how the server uses these options:

■ VIC 1240 to 2208XP

■ VIC 1240 plus Port Expander Card for VIC 1240 to 2208XP

In Figure 10, two ports from the VIC 1240 are channeled to 2208XP Fabric Extender A and two are

channeled to 2208XP Fabric Extender B. The result is 20 Gbps of bandwidth to each Fabric Extender.

Figure 10 Option 1 - VIC 1240 to UCS 2208XP Fabric Extender (no mezzanine adapter)

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 57 58

No comments

Cisco UCS-CPU-E52609BC= Datasheet Page 47