Cisco 3560 User Manual download pdf (Page 25)

1-15

Catalyst 3560 Switch Hardware Installation Guide

OL-6337-07

Chapter 1 Product Overview

Rear Panel Description

Dual-Purpose Port LEDs

The LEDs on a dual-purpose port (see Figure 1-13) show whether the RJ-45 connector is connected or

whether an SFP module is installed. You can configure each port as either a 10/100/1000 port through

the RJ-45 connector or as an SFP module, but not both at the same time. The LEDs show how the port

is being used.

The LED colors have the same meaning as described in Table 1-4 to Table 1-6.

Figure 1-13 Dual-Purpose Port LEDs

Cable Guard

You can order an optional cable guard to secure cables to the front of the switch and prevent them from

being accidentally removed. To order a cable guard (CBLGRD-C3560-12PC or CBLGRD-C3560-8PC),

contact your Cisco representative. The cable guard serves a different purpose than the cable guide (see

“Attaching the Cable Guide” section on page 2-11).

Rear Panel Description

• Internal Power Supply, page 1-18

• Cisco RPS, page 1-19

• Console Port, page 1-19

• Security Slots, page 1-20

Note The Catalyst 3560-8PC and the Catalyst 3560-12PC-S switches do not have an RPS connector or a fan.

The switch console port is on the front panel.

1 RJ-45 connector 3 SFP module port LED

2 RJ-45 port LED 4 SFP module slot

2 3

1 ... 24 25 26 ... 120

No comments

Cisco 3560 User Manual Page 25