Cisco DPC3829 Specifications download pdf (Page 50)

Configure Security

42 Cox Business Internet Gateway Admin Guide

Section

Field Description

Buttons

Connect. Click to establish a connection for the current VPN

tunnel. If you have made any changes, click Save Settings to

first apply your changes.

Disconnect. Click to break a connection for the current VPN

tunnel.

View Log. Click to view the VPN log, which shows details of

each established tunnel.

Advanced Settings. If the Key Exchange Method is Auto (IKE),

this button provides access to additional settings relating to IKE.

Click this button if the gateway is unable to establish a VPN

tunnel to the remote gateway, and make sure the Advanced

Settings match those on the remote gateway.

Phase 1 - Operation Mode. Select the method appropriate for

the remote VPN endpoint.

Main: Main mode is slower but more secure.

Aggressive: Aggressive mode is faster but less secure.

Local Identity. Select the desired option to match the Remote

Identity setting at the other end of this tunnel.

Local IP Address: Your WAN ( Internet) IP address.

Name: Your domain name.

Remote Identity. Select the desired option to match the Local

Identity setting at the other end of this tunnel.

Local IP Address: WAN ( Internet) IP address of the remote

VPN endpoint.

Name: Domain name of the remote VPN endpoint.

Encryption. This is the encryption algorithm used for the IKE

SA. It must match the setting used at the other end of the

tunnel.

Follow these instructions to configure VPN settings.

1. From the Security menu in the toolbar, click the VPN tab.

2. Use the information in the Field Description column in the table above to help you

populate the fields.

3. After you make your selections, click the Save Settings button to apply your

changes or click the Cancel Changes button to withdraw.

1 ... 49 50 51 ... 100

No comments

Cisco DPC3829 Specifications Page 50