Cisco 7300-6T3 User Manual download pdf (Page 17)

1-5

Clear Channel 6-Port T3 (DS3) Line Card Installation and Configuration

OL-3449-02

Chapter 1 Overview

T3 SMB Cables

Figure 1-3 T3 SMB Cables (SMB Terminates into BNC)

Note Electromagnetic compliance (EMC) was verified with the 10-foot (3.048 meters) shielded cables that

are orderable through Cisco. We recommend that you use only the 10-foot (3.048 meters) shielded T3

SMB cables; otherwise, EMC is not guaranteed.

If you use cables other than those ordered from Cisco, it is your responsibility to ensure that you have a

compliant system that meets local EMC requirements. To order additional cables, use the product

numbers: 2CBLE-SMB-BNC-M (male) and 2CBLE-SMB-BNC-F (female).

Note When you connect the 10-foot (3.048 meters) shielded T3 SMB cables to the 6T3 line card,

be careful not to bend the male cable connector pin when you connect or disconnect the

cables. Observe the receive (RX) and transmit (TX) cabling relationship shown in

Figure 1-4.

Figure 1-4 Connecting T3 SMB Cables

70005

SMB connector Female BNC

connector

Male BNC

connector

LNK

66771

7300-6T3

6-PORT T3 DSU

STATUS

OIR

LNK

1 ... 16 17 18 ... 54

No comments

Cisco 7300-6T3 User Manual Page 17