Cisco IGX 8 User Manual download pdf (Page 23)

ftc-trunk voice-dlci

Cisco MC3810–IGX 8400 Interworking MOD-23

ftc-trunk voice-dlci

To map the FTC voice DLCI to an existing Frame Relay DLCI for voice trafﬁc on the

Cisco MC3810, use the ftc-trunk voice-dlci interface conﬁguration command. To remove the FTC

voice DLCI from the interface, use the no form of this command.

ftc-trunk voice-dlci dlci [remote-voice-dlci dlci]

no ftc-trunk voice-dlci dlci [remote-voice-dlci dlci]

Syntax Description

Default

No FTC trunk voice DLCI is conﬁgured.

Command Mode

Interface conﬁguration mode

Usage Guidelines

This command ﬁrst appeared in Cisco IOS Release 12.0(2)T.

Do not enter the same DLCI that was assigned to the FTC management DLCI using the ftc-trunk

management-dlci command.

Example

The following conﬁgures the FTC trunk voice DLCI:

interface serial 1

ftc-trunk voice-dlci 100

Related Commands

connect

connect voice

encapsulation ftc-trunk

ftc-trunk frame-relay-dlci

ftc-trunk management-dlci

ftc-trunk management-protocol

dlci

Speciﬁes the Frame Relay DLCI for the IGX switch.

remote-voice-dlci dlci

(Optional) Speciﬁes the remote voice DLCI If there is a public Frame Relay cloud

between the Cisco MC3810 FTC port and the IGX FTM port. Enter this option only if

the local DLCI and the remote DLCI are not the same.

1 2 ... 18 19 20 21 22 23 24

No comments

Cisco IGX 8 User Manual Page 23