Cisco WUSB54GS User's Guide download pdf (Page 11)

Chapter 3

Configuration

Wireless-G USB Network Adapter

Locate the Button

After clicking the SecureEasySetup button, you will be

asked to locate the SecureEasySetup button or Cisco

logo button on the device with which the Adapter will

be communicating. If you are not sure where to find this

button, click Where can I find the button?

Where can I find the Button?

This will walk you through a couple of screens to help you

find the button, which is usually located on the front of

the wireless router or access point.

If you’ve clicked the button by accident or do not wish to

use SecureEasySetup, you can click Back to return to the

previous screen.

Press the Cisco logo or SecureEasySetup button on

the wireless router or access point. When it turns white

and begins to flash, click the Next button on the Setup

Wizard screen. The logo or button will stop flashing on the

wireless router or access point when the Adapter has been

successfully added to the network. Repeat this procedure

for any additional SecureEasySetup device.

NOTE: You can only add one SecureEasySetup

device at a time.

SecureEasySetup is now complete and a configuration

profile will has been created automatically. You may save

your configuration profile to a text file by clicking the

Save button, or print the configuration by clicking the

Print button. Click Connect to Network to connect to

your network.

SecureEasySetup

Congratulations! SecureEasySetup is complete.

Available Wireless Networks

The available networks are listed in the table on the

center of the screen by Wireless Network Name. Select

the wireless network you wish to connect to and click

Connect. (If you do not see your network listed, you can

click Refresh to bring the list up again.) If the network

utilizes wireless security, you will need to configure

security on the Adapter. If not, you will be taken directly to

the Congratulations screen.

If you have wireless security enabled on your network, 1.

continue to step 2. If you don’t have wireless security

enabled, continue to step 3.

If your network has WEP, WPA, or WPA2 wireless security 2.

enabled, then that security screen appears. Continue

to the screen for your wireless security.

1 ... 10 11 12 ... 40

Comments to this Manuals

No comments

Cisco WUSB54GS User's Guide Page 11

Comments to this Manuals

Related products and manuals for Networking cards Cisco WUSB54GS