Cisco WUSB54GS User's Guide download pdf (Page 13)

Chapter 3

Configuration

Wireless-G USB Network Adapter

Congratulations

Congratulations! The profile is successfully configured.

Manual Setup

If you are not taking advantage of SecureEasySetup and

your network is not listed among the available networks,

click Manual Setup on the Available Wireless Network

screen to set up the adapter manually.

Available Wireless Networks

Click 1. Manual Setup on the Available Wireless Networks

screen to set up the adapter manually.

The 2. Network Settings screen appears.

Network Settings

If your network has a router or other DHCP server, select

Obtain network settings automatically (DHCP).

If your network does not have a DHCP server or router,

select Specify network settings. Enter an IP Address,

Subnet Mask, Default Gateway, and DNS addresses

appropriate for your network. You must specify the

IP Address and Subnet Mask on this screen. If you are

unsure about the Default Gateway and DNS addresses,

leave these fields empty.

IP Address This IP Address must be unique to your

network.

Subnet Mask The Adapter’s Subnet Mask must be the

same as your wired network’s Subnet Mask.

Default Gateway Enter the IP address of your network’s

Gateway here.

DNS 1 and DNS 2 Enter the DNS address of your wired

Ethernet network here.

Click Next to continue, or click the Back button to

return to the previous screen.

The 3. Wireless Mode screen shows a choice of two

wireless modes. Select Infrastructure Mode if you

want to connect to a wireless router or access point.

Select Ad-Hoc Mode if you want to connect to another

wireless device directly without using a wireless router

or access point. Enter the SSID for your network.

1 ... 12 13 14 ... 40

No comments

Cisco WUSB54GS User's Guide Page 13