Cisco WUSB54GS User's Guide download pdf (Page 7)

Chapter 3

Configuration

Wireless-G USB Network Adapter

DHCP Client This displays the Adapter’s status as a DHCP

client.

MAC Address This is the MAC address of the wireless

network’s access point or wireless router.

Cisco AP IP This displays the Cisco AP IP Address when

LEAP wireless security is used.

Signal Strength The Signal Strength bar indicates the

signal strength.

Link Quality The Link Quality bar indicates the quality of

the wireless network connection.

Click Statistics to go to the Wireless Network Statistics

screen. Click Back to return to the initial Link Information

screen. Click Save to Profile to save the currently active

connection settings to a profile.

Wireless Network Statistics

The Wireless Network Statistics screen provides statistics

on your current network settings.

Wireless Network Statistics

Transmit Rate This is the data transfer rate of the current

connection. (In Auto mode, the Adapter dynamically shifts

to the fastest data transfer rate at any given time.)

Receive Rate This is the rate that the Adapter receives

data.

Packets Received This shows the packets that the

Adapter receives, in real time, after connecting to the

wireless network or after clicking Refresh.

Packets Transmitted This shows the packets that the

Adapter transmits, in real time, after connecting to the

wireless network or after clicking Refresh.

Bytes Received This shows the bytes received by the

Adapter, in real time, since connecting to the wireless

network or since the Refresh Statistics button was last

pressed.

Bytes Transmitted This shows the bytes transmitted by

the Adapter, in real time, since connecting to the wireless

network or since the Refresh Statistics button was last

pressed.

Driver Version This shows the Adapter’s driver version.

Noise Level This shows the level of background noise

that affects the wireless signal. A lower reading translates

into a higher quality signal.

Signal Strength This is the intensity of the wireless signal

that the Adapter receives.

Transmit Power This is the power output at which the

Adapter is transmitting.

Up Time This indicates the length of the most recent

connection to a wireless network.

Total Up Time This indicates the cumulative total of the

Adapter’s connection time.

Signal Strength The Signal Strength bar indicates the

signal strength.

Link Quality The Link Quality bar indicates the quality of

the wireless network connection.

Click Back to return to the initial Link Information

screen. Click Status to go to the Wireless Network Status

screen. Click Save to Profile to save the currently active

connection settings to a profile. Click Refresh to reset the

statistics.

SecureEasySetup

While using the Monitor, you might see the

SecureEasySetup button on the right-hand side of the

screen. This button can be used to set up the Adapter, if

this has not already been done. With SecureEasySetup,

setting up the Adapter is as simple as pushing a couple

of buttons. Before you press any buttons, though, you

should locate the SecureEasySetup button on the device

you’re connecting the Adapter to, such as a wireless router

or access point.

1 2 3 4 5 6 7 8 ... 40

Comments to this Manuals

No comments

Cisco WUSB54GS User's Guide Page 7

Comments to this Manuals

Related products and manuals for Networking cards Cisco WUSB54GS