Cisco RV082 - Small Business VPN Router User's Guide download pdf (Page 47)

Chapter 4

Advanced Configuration

10/100 8-Port VPN Router

IP address Select this option if you know the static IP

address of the remote VPN device at the other end of the

tunnel, and then enter the IP address.

IP by DNS Resolved Select this option if you do not

know the static IP address of the remote VPN device but

you do know its domain name. Then enter the remote

VPN device’s domain name on the Internet. The Router

will retrieve the IP address of the remote VPN device via its

public DNS records.

IP + Domain Name(FQDN) Authentication

The IP address and domain name ID must match the Local

Gateway of the remote VPN device, and they can only be

used for one tunnel connection.

Remote Security Gateway Type > IP + Domain Name(FQDN)

Authentication

IP address Select this option if you know the static IP

address of the remote VPN device at the other end of the

tunnel, and then enter the IP address.

IP by DNS Resolved Select this option if you do not

know the static IP address of the remote VPN device but

you do know its domain name. Then enter the remote

VPN device’s domain name on the Internet. The Router

will retrieve the IP address of the remote VPN device via its

public DNS records.

Domain Name Enter the domain name as an ID (it cannot

be a real domain name on the Internet).

IP + E-mail Addr.(USER FQDN) Authentication

Remote Security Gateway Type > IP + E-mail Addr.(USER FQDN)

Authentication

IP address Select this option if you know the static IP

address of the remote VPN device at the other end of the

tunnel, and then enter the IP address.

IP by DNS Resolved Select this option if you do not

know the static IP address of the remote VPN device but

you do know its domain name. Then enter the remote

VPN device’s domain name on the Internet. The Router

will retrieve the IP address of the remote VPN device via its

public DNS records.

E-mail address Enter the e-mail address as an ID.

Dynamic IP + Domain Name(FQDN) Authentication

The Local Security Gateway will be a dynamic IP address,

so you do not need to enter the IP address. When the

Remote Security Gateway requests to create a tunnel with

the Router, the Router will work as a responder.

The domain name must match the Local Gateway of the

remote VPN device and can only be used for one tunnel

connection.

Remote Security Gateway Type > Dynamic IP + Domain Name(FQDN)

Authentication

Domain Name Enter the domain name for authentication.

(Once used, you cannot use it again to create a new tunnel

connection.)

Dynamic IP + E-mail Addr.(USER FQDN) Authentication

The Remote Security Gateway will be a dynamic IP

address, so you do not need to enter the IP address. When

the Remote Security Gateway requests to create a tunnel

with the Router, the Router will work as a responder.

Remote Security Gateway Type > Dynamic IP + E-mail Addr.(USER

FQDN) Authentication

E-mail address Enter the e-mail address for

authentication.

Remote Security Group Type

Select the Remote Security Group behind the Remote

Gateway that can use this VPN tunnel. Select the type

you want to use: IP, Subnet, or IP Range. Follow the

instructions for the type you want to use.

NOTE: The Remote Security Group Type you

select should match the Local Security Group

Type selected on the VPN device at the other

end of the tunnel.

After you have selected the Remote Security Group

Type, the settings available on this screen may change,

depending on which selection you have made.

Only the computer with a specific IP address will be able

to access the tunnel.

1 ... 46 47 48 ... 111

Comments to this Manuals

No comments

Cisco RV082 - Small Business VPN Router User's Guide Page 47

Comments to this Manuals

Related products and manuals for Networking Cisco RV082 - Small Business VPN Router