Cisco RV082 - Small Business VPN Router User's Guide download pdf (Page 74)

Gateway-to-Gateway VPN Tunnel

10/100 8-Port VPN Router

Appendix C

Configuration when the Remote Gateway

Uses a Dynamic IP Address

This example assumes the Remote Gateway is using a

dynamic IP address. If the Remote Gateway uses a static

IP address, refer to “Configuration when the Remote

Gateway Uses a Static IP Address.”

RVL200

WAN: A.A.A.A

LAN: 192.168.5.1

RV082

Dynamic IP: B.B.B.B with

Domain Name: www.abc.com

LAN: 192.168.1.1

Gateway-to-Gateway IPSec VPN Tunnel - Remote Gateway Using

Dynamic IP

NOTE: Each computer must have a network

adapter installed.

Configuration of the RVL200

Follow these instructions for the first VPN Router,

designated RVL200. The other VPN Router is designated

the RV082.

Launch the web browser for a networked computer, 1.

designated PC 1.

Access the web-based utility of the RVL200. (Refer to 2.

the User Guide of the RVL200 for details.)

Click the3. IPSec VPN tab.

Click the 4. Gateway to Gateway tab.

Enter a name in the 5. Tunnel Name field.

For the VPN Tunnel setting, select 6. Enable.

For the Local Security Gateway Type, select 7. IP Only.

The WAN IP address (A.A.A.A) of the RVL200 will be

automatically detected.

For the Local Security Group Type, select Subnet. Enter

the RVL200’s local network settings in the IP Address

and Subnet Mask fields.

RVL200 IPSec VPN Settings

For the Remote Security Gateway Type, select 8. IP Only.

Then select IP by DNS Resolved. Enter the RV082’s

domain name in the field provided.

For the Remote Security Group Type, select 9. Subnet.

Enter the RV082’s local network settings in the IP

Address and Subnet Mask fields.

In the IPSec Setup section, select the appropriate 10.

encryption, authentication, and other key management

settings.

In the 11. Preshared Key field, enter a string for this key, for

example, 13572468.

RVL200 IPSec Setup Settings

If you need more detailed settings, click 12. Advanced

Settings. Otherwise, click Save Settings and proceed

to the next section, “Configuration of the RV082.”

Configuration of the RV082

Follow similar instructions for the RV082.

Launch the web browser for a networked computer, 1.

designated PC 2.

Access the web-based utility of the RV082. (Refer to 2.

“Chapter 4: Advanced Configuration” for details.)

Click the3. VPN tab.

Click the 4. Gateway to Gateway tab.

Enter a name in the 5. Tunnel Name field.

Select the appropriate Interface, 6. WAN1 or WAN2.

1 ... 73 74 75 ... 111

Comments to this Manuals

No comments

Cisco RV082 - Small Business VPN Router User's Guide Page 74

Comments to this Manuals

Related products and manuals for Networking Cisco RV082 - Small Business VPN Router