Cisco WAG310G User's Guide Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
What's on the Back Panel?
3425-00669 Rev E 5
What's on the Back Panel?
The back panel of your residential gateway provides ports, power, and reset
mechanisms. Refer to the following diagram for a description of the back panel.
1 DSLThe DSL port connects to the ADSL line.
2 LineThe Line port connects to either the voice connection on the DSL
microfilter or wall jack.
3 Phone 1-2 The Phone ports connect standard analog telephones to the
residential gateway. The Phone 1 or 2 LED on the front panel lights up when a
phone is connected to the corresponding port on the residential gateway’s back
panel. It flashes when the phone is being used.
4 USBThe USB port connects to a USB storage device, such as a USB hard drive
or flash disk.
5 Ethernet WAN/LAN5The WAN/LAN5 port can act as a Wide Area Network
(WAN) or Local Area Network (LAN) port. As a WAN port, it connects to a
broadband modem. As a LAN port, it connects to a wired computer or other
Ethernet network device.
6 Ethernet LAN 1-4These Ethernet ports (1, 2, 3, 4) connect the residential
gateway to wired computers and other Ethernet network devices.
7 Power SwitchUse this switch to power on or off the residential gateway.
8 PowerThe Power port is where you will connect the 12v/2A power adapter
that is included in the box.
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 163 164

Comments to this Manuals

No comments