Cisco UCS C240 M3 Specifications download pdf (Page 18)

Cisco UCS C240 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)

CONFIGURING the SERVER

Approved Configurations

(1) 1-CPU Configurations

Mezzanine cards are not supported for 1-CPU configurations, Therefore, only the following RAID

controllers are supported for single-CPU configurations:

■ LSI MegaRAID SAS 9266-8i

■ LSI MegaRAID 9266CV-8i

(2) 2-CPU Configurations

Select a mezzanine card RAID option from Table 5 or one of the RAID controllers from Table 6.

You may also select an appropriate optional RAID configuration listed in Table 6.

Caveats

■ The mezzanine controller is not available for 1-CPU configurations.

■ If you choose a mezzanine card RAID controller, all five of the PCIe card slots are still

available for adding optional PCIe cards.

■ The optional PCIe RAID controllers are all half-height PCIe cards. If you choose one of these

cards, four PCIe card slots will be available for adding an optional PCIe card.

■ Note that only a single Cisco UCS P81E Virtual Interface Card (VIC) card (a full-height PCIe

card) is supported and it must be installed in the full-length, full-height PCIe slot (slot 1) on

riser 1. So take this into account when populating RAID controller cards.

■ You can choose only one RAID controller (plug-in PCIe RAID controller or mezzanine card

RAID controller).

■ You can choose an optional RAID configuration (RAID 0, 1, 5, 6, or 10), which is

preconfigured at the factory. The RAID level you choose must be an available RAID choice for

the controller selected. RAID levels 50 and 60 are supported, although they are not available

as configuration options.

NOTE: No RAID option can be chosen if you have no drives

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

No comments

Cisco UCS C240 M3 Specifications Page 18