Cisco UCS C240 M3 Specifications Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 49
Cisco UCS C240 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
50
SUPPLEMENTAL MATERIAL
Low-Voltage DIMM Considerations
The C240 M3 server can be ordered with dual-voltage (1.35 V) DIMMs. Note the following considerations:
Low-voltage DIMMs within the server must have the identical manufacturer, type, speed,
and size.
Low-voltage DIMMs and standard-voltage DIMMs can be mixed in the same server. Note that
this causes the system BIOS to default to standard-voltage operation (Performance Mode).
That is, the server cannot operate in Power Saving Mode unless all DIMMs are low-voltage
DIMMs.
CPUs that have a maximum memory frequency less than 1333 MHz support low-voltage
DIMMs operating in Power Saving Mode only, and do not support Performance Mode.
RAID Summary
The C240 M3 LFF server has a 12-drive backplane with a SAS expander.
No embedded RAID support
Mezzanine card (UCSC-RAID-11-C220) supports up to 12 drives
Mezzanine card (UCSC-RAID-MZ-220) supports up to 12 drives
9266-8i and 9266CV-8i PCIe cards support up to 12 drives
7 x 16 GB 7 112 GB 7 x 16 GB 7 112 GB 224 GB
8 x 16 GB 8 128 GB 8 x 16 GB 8 128 GB 256 GB
9 x 16 GB 9 144 GB 9 x 16 GB 9 144 GB 288 GB
10 x 16 GB 10 160 GB 10 x 16 GB 10 160 GB 320 GB
11 x 16 GB 11 176 GB 11 x 16 GB 11 176 GB 352 GB
12 x 16 GB 12 192 GB 12 x 16 GB 12 192 GB 384 GB
Notes . . .
1. Configurations for optimum memory performance are highlighted in yellow.
NOTE: If you do not select a mezzanine card or a plug-in PCIe RAID card you will
have no RAID at all since the embedded SATA-only RAID controller that supports up to
four SATA-only drives (RAID 0, 1, 10) is not compatible with a SAS expander.
Table 27 Supported DIMM Configurations (continued)
1
CPU 1 DIMMs
Total
DIMMs for
CPU 1
CPU 1
Capacity
CPU 2 DIMMs
Total
DIMMs for
CPU 2
CPU 2
Capacity
Total
Capacity for
2 CPUs
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Comments to this Manuals

No comments