Cisco IAD2430 User Manual download pdf (Page 44)

3-8

Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide

OL-4234-06

Chapter 3 Installing Cisco IAD2430 Series IADs

Rack-Mounting the Chassis

Figure 3-6 Telco 19-Inch Rack Installation—Back Panel Forward

To install the Cisco IAD2435 chassis in a rack with the back panel forward, attach the brackets as shown

Figure 3-7.

Figure 3-7 IAD2435 Rack Installation with Back Panel Forward

Installing the Cisco IAD2430 Series IADs in a Rack

The following warning applies only when the unit is rack-mounted:

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special

precautions to ensure that the system remains stable. The following guidelines are provided to ensure

your safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component

at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.

Statement 1006

Warning

Take care when connecting units to the supply circuit so that wiring is not overloaded.

Statement 1018

To rack-mount the chassis, follow these steps:

Step 1 Choose one of the methods shown in Figure 3-4 on page 3-7, Figure 3-5 on page 3-7, Figure 3-6 on

page 3-8, or Figure 3-7 on page 3-8, and attach the long side of the mounting brackets to the chassis, as

shown.

88842

231983

435-8

FXS

2V DC S

SOL

AUX

stE

1/E

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 85 86

No comments

Cisco IAD2430 User Manual Page 44