Cisco IAD2430 User Manual download pdf (Page 67)

3-31

Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide

OL-4234-06

Chapter 3 Installing Cisco IAD2430 Series IADs

Ports, Connectors, and Pinouts

Figure 3-29 Digital Voice Connection

Step 2 Connect the RJ-48 jack to the digital telephone equipment (PBX).

Ports, Connectors, and Pinouts

Table 3-5 summarizes the cable connections between Cisco IADs and the network and user interfaces.

Remote Terminal Connections (If Applicable)

If you are configuring a Cisco IAD from a remote location, connect the modem and the remote PC or

terminal to the telephone network as described in this section.

88999

RJ-48 T1 cable

Digital PBX

or channel bank

Ta b l e 3-5 Cable Use Reference Table

Cisco IAD Port Port Color Connector/Cable Interface To

Console Light blue RJ-45/rollover PC

ASCII terminal

Auxiliary Black RJ-45/rollover Modem

Fast Ethernet Yellow RJ-45/Fast Ethernet LAN

Serial 0 Blue Cisco 12-in-1 serial cable EIA/TIA-530

EIA/TIA-530A

EIA/TIA-232

EIA/TIA-449

V. 3 5

X.21

T1/E1-WAN Light green RJ-48/Straight-through T1/E1 trunk

T1/E1-PBX digital voice Black RJ-48/Straight-through Digital PBX, T1/E1

Analog voice multiport Gray RJ-21X/50-conductor Distribution panel for analog telephone,

fax, PBX, or central office line

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 85 86

No comments

Cisco IAD2430 User Manual Page 67