Cisco IAD2430 User Manual download pdf (Page 53)

3-17

Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide

OL-4234-06

Chapter 3 Installing Cisco IAD2430 Series IADs

Installing a WAN or Voice Card

Figure 3-16 Chassis Ground Connection Using Ring Terminal

Step 5 Connect the other end of the ground wire to a grounding point at your site.

Installing a WAN or Voice Card

The Cisco IAD2430 series IADs include a slot for a WAN interface card (WIC) or a voice interface card

(VIC).

Note The Cisco IAD2435 router is a fixed-configuration router and does not support interface cards.

The following WICs and VICs (also used by the Cisco 2600 series and Cisco 3600 series routers) are

supported in releases of the Cisco IAD2430 series IADs:

• WIC-1T

• WIC-2T

• WIC-1DSU-T1/E1

• VIC2-2FXS

• VIC2-4FXS

• VIC2-2FXO

• VIC2-4FXO

• VIC2-2BRI-NT/TE

• WIC-1ADSL

• WIC-1SHDSL-V2

• WIC-1ADSL-DG

• VWIC-2MFT-T1/E1

• VWIC-2MFT-E1

Warning

For connections outside the building where the equipment is installed, the following ports must be

connected through an approved network termination unit with integral circuit protection.

FXS/T3/E3.

Statement 1044

103512

Ring terminal

attachment

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 85 86

No comments

Cisco IAD2430 User Manual Page 53