Cisco 7000 and 7507 Chassis MAS-7K Specifications download pdf (Page 34)

REVIEW DRAFT—CISCO CONFIDENTIAL

3-34

Cisco 7500 Series Installation and Configuration Guide

OL-5008-03 B0

Chapter 3 Installing a Cisco 7500 Series Router

What Do I Do Now?

To connect the network interfaces, refer to one of the following:

• The companion publicationInterface Processor Installation and Configuration Guide, which

includes the following information:

–

Complete descriptions of each interface processor and its electrical interfaces

–

Specific safety information for each interface processor, as appropriate

–

All electrical interface and interface cabling specifications

–

Cable pinouts (for cables supplied by Cisco Systems, except for bus and tag cables for the

Channel Interface Processor [CIP2]) and connector pinouts for all electrical interfaces on Cisco

Systems interface processors (again, except the CIP2)

–

Interface processor LED indications

–

Tools and parts required (including cables supplied by Cisco Systems)

–

Basic configuration information for each interface processor

–

Specific interface processor troubleshooting information not included in Chapter 8,

“Troubleshooting a Cisco 7500 Series Router”

• The configuration note Second-Generation Versatile Interface Processor (VIP2) Installation and

Configuration (Document Number 78-2658-xx), which shipped with your VIP, and the individual

port adapter configuration notes that shipped with your VIP-based port adapters.

These documents include the following information:

–

Complete descriptions of each VIP and VIP-based port adapters, and their electrical interfaces

–

Specific safety information for each port adapter, as appropriate

–

All interface and cabling specifications

–

Cable pinouts and connector pinouts for all electrical interfaces on the port adapters

–

Port adapter LED indications

–

Tools and parts required (including cables supplied by Cisco Systems)

–

Basic configuration information for each port adapter

–

Specific interface processor troubleshooting information not included in Chapter 8,

“Troubleshooting a Cisco 7500 Series Router”

After you have connected all network interface cables, see Chapter 4, “Performing a Basic Configuration

of the System.”

For more complete software and protocol configuration information, refer to the companion Cisco IOS

software configuration publications, which are listed in the “If You Need More Configuration

Information” section on page 4-32.

Note When configuring the interface processors installed in your Cisco 7500 series router, we also recommend

that you use the Interface Processor Installation and Configuration Guide in conjunction with

Chapter 4, “Performing a Basic Configuration of the System.”

1 2 ... 29 30 31 32 33 34

Comments to this Manuals

No comments

Cisco 7000 and 7507 Chassis MAS-7K Specifications Page 34

Comments to this Manuals