Chapter 4 Configuring Routing Among VLANs with IEEE 802.1Q Encapsulation
IEEE 802.1Q Encapsulation Configuration Task List
4-4
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Configuring IPX Routing over IEEE 802.1Q
Internet Packet Exchange (IPX) Routing over IEEE 802.1Q VLANs extends
Novell NetWare routing capabilities to include support for routing Novell
Ethernet 802.3 encapsulation frame types in VLAN configurations. Users with
Novell NetWare environments can configure Novell Ethernet 802.3 encapsulation
frames to be routed, using IEEE 802.1Q encapsulation across VLAN boundaries.
To configure Cisco IOS software on a router with connected VLANs to exchange
IPX Novell Ethernet 802.3 encapsulated frames, perform these tasks in the order
in which they are appear:
• Enabling NetWare Routing
• Defining the VLAN Encapsulation Format
• Configuring NetWare on the Subinterface
Enabling NetWare Routing
To enable IPX routing on IEEE 802.1Q interfaces, use the following command in
global configuration mode.
Command Task
ipx routing [node]
Enable IPX routing globally.
Comments to this Manuals