Cisco PA-E3 Specifications download pdf (Page 14)

Software and Hardware Requirements

PA-E3 Serial Port Adapter Installation and Configuration

2-2

Software and Hardware Requirements

Table 2-1 lists the minimum Cisco IOS software release required to use the one-port PA-E3 and

two-port PA-2E3 in supported router platforms.

Table 2-1 PA-E3 and PA-2E3 Software Requirements

Caution

The VIP2 requires that the host Cisco 7000 series router have the RSP7000 and RSP7000CI

installed. The VIP2 does not operate properly with the Route Processor (RP), Switch Processor (SP), or

Silicon Switch Processor (SSP) installed in the host Cisco series router.

The PA-E3 is considered a high-bandwidth port adapter; therefore at a minimum, Cisco recommends

that the PA-E3 be installed on the VIP2-15 or Catalyst RSM/VIP2-15 motherboard (with 1 MB of

SRAM and 8 MB of DRAM). Installation of the PA-E3 on the VIP2-10 (with 512 KB of SRAM and

8 MB of DRAM) is not recommended.

Platforms Recommended Minimum Cisco IOS Release

Cisco 7000 and Cisco 7500 Series

PA-E3 PA-2E3

• With VIP2-15(=) or VIP2-40(=)

• With VIP2-50(=)

Cisco IOS Release 11.1(13)CA or a later

release of Cisco IOS Release 11.1 CA

Cisco IOS Release 11.1(14)CA or a later

release of Cisco IOS Release 11.1 CA

Cisco IOS Release 11.1(16)CA or a later

release of Cisco IOS Release 11.1 CA

Cisco IOS Release 11.1(16)CA or a later

release of Cisco IOS Release 11.1 CA

Cisco 7200 Series

• Cisco 7204VXR and Cisco 7206VXR Cisco IOS Release 12.0(2)XE2 or a later

release of Cisco IOS Release 12.0 XE

Cisco IOS Release 12.0(3)T or a later release

of Cisco IOS Release 12.0 T

Cisco IOS Release 12.0(2)XE2 or a later

release of Cisco IOS Release 12.0 XE

Cisco IOS Release 12.0(3)T or a later release

of Cisco IOS Release 12.0 T

• Cisco 7204 and Cisco 7206 Cisco IOS Release 11.1(16)CA or a later

release of Cisco IOS Release 11.1 CA

Cisco IOS Release 11.1(16)CA or a later

release of Cisco IOS Release 11.1 CA

• Cisco 7202 Cisco IOS Release 11.1(19)CC1 or a later

release of Cisco IOS Release 11.1 CC

Cisco IOS Release 11.3(4)AA or a later

release of Cisco IOS Release 11.3 AA

Cisco IOS Release 11.1(19)CC1 or a later

release of Cisco IOS Release 11.1 CC

Cisco IOS Release 11.3(4)AA or a later

release of Cisco IOS Release 11.3 AA

Cisco uBR7200 Series

• Cisco uBR7246 and Cisco uBR7223 Cisco IOS Release 12.0(2)XA or a later

release of Cisco IOS Release 12.0 XA

Cisco IOS Release 12.0(2)XA or a later

release of Cisco IOS Release 12.0 XA

Cisco 7100 Series

• Cisco 7120 series and Cisco 7140 series Cisco IOS Release 12.0(4)XE or a later

release of Cisco IOS Release 12.0 XE

Cisco IOS Release 12.0(5)T or a later release

of Cisco IOS Release 12.0 T

Catalyst 5000 Family Switches

• With Catalyst RSM/VIP2-15(=) or

Catalyst RSM/VIP2-40(=)

Cisco IOS Release 12.0(1) or a later release of

Cisco IOS Release 12.0

Cisco IOS Release 12.0(1) or a later release of

Cisco IOS Release 12.0

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Comments to this Manuals

No comments

Cisco PA-E3 Specifications Page 14

Comments to this Manuals

Related products and manuals for Networking Cisco PA-E3