Cisco SF 200-24P Technical Information download pdf (Page 102)

Port Management

Configuring Link Aggregation

Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 94

Setting Port LACP Parameter Settings

The LACP page displays and enables configuration of the LACP System Priority,

LACP timeout, and LACP port priority. LACP timeout is a per port parameter, and is

the time interval between the sending and receiving of consecutive LACP PDUs.

With all factors equal, when the LAG is configured with more candidate ports than

the maximum number of active ports allowed, the switch selects ports as active

from the dynamic LAG that has the highest priority

NOTE The LACP setting is irrelevant on ports that are not members of a dynamic LAG.

To d e f i n e t h e L A C P s e t t i n g s :

STEP 1 Click Port Management > Link Aggregation > LACP. The

LACP

page opens.

STEP 2 Select a port, and click Edit. The

Edit LACP

page opens.

STEP 3 Enter the values for the following fields:

• Port—Select the port number to which timeout and priority values are

assigned.

• LACP Port Priority—Enter the LACP priority value for the port.

• LACP Timeout—Select the periodic transmissions of LACP PDUs, which

occur at either a long or short transmission speed, depending upon the

expressed LACP timeout preference.

STEP 4 Click Apply. The Running Configuration file is updated.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 276 277

No comments

Cisco SF 200-24P Technical Information Page 102